Advertisement
QuickSpecs
Additional Options
HP SAS Option Kit
HP I/O Expansion
Options
HP Cable Option
Specifications and additional information:
http://h18000.www1.hp.com/products/quickspecs/12700_div/12700_div.html
(Smart Array E500 Controller)
http://h18000.www1.hp.com/products/quickspecs/12400_div/12400_div.html
(Smart Array P400 Controller)
http://h18000.www1.hp.com/products/quickspecs/12616_div/12616_div.html
(Smart Array P800 Controller)
http://h18000.www1.hp.com/products/quickspecs/13203_div/13203_div.html
(Smart Array P212 Controller)
http://h18000.www1.hp.com/products/quickspecs/13202_div/13202_div.html
(Smart Array P411 Controller)
http://h18000.www1.hp.com/products/quickspecs/13558_div/13558_div.html
(Smart Array P812 Controller)
http://h18004.www1.hp.com/products/quickspecs/13232_div/13232_div.html
(SAS Expander Card)
SAS HBA
HP SC08Ge Host Bus Adapter
HP SC44Ge Host Bus Adapter
NOTE: Please see the following QuickSpecs for additional information:
http://h18004.www1.hp.com/products/quickspecs/13082_div/13082_div.html
(SC08Ge HBA)
http://h18004.www1.hp.com/products/quickspecs/12617_div/12617_div.html
(SC44Ge HBA)
SCSI HBA
HP SC11Xe Host Bus Adapter
NOTE: Recommended HBA for SCSI tape drive connect.
HP DL785 G5 SAS Option Kit
NOTE: The SAS Option Kit enables the second drive cage to support an
additional eight SFF SAS hard disk drives, for a total internal support of sixteen
SFF SAS hard disk drives.
NOTE: When choosing the HP DL785 G5 SAS Option Kit, customer must also
order one of the following Smart Array Controllers: HP Smart Array P400
Controller, HP Smart Array P800 Controller, HP Smart Array P812 Controller, or
the HP Smart Array P410 Controller.
NOTE: The SAS Option Kit enables the second drive cage to support an
additional eight SFF SAS hard disk drives, for a total internal support of sixteen
SFF SAS hard disk drives.
HP I/O PCI-e & HTx Backplane Upgrade Kit
NOTE: I/O Backplane with 7 PCIe and 2 HTx slots.
NOTE: VMware is not supported on DL785 G5 with backplane that has (2) HTx
slots and (7) PCI-Express slots.
HP High Power Graphics Card Cable Option
NOTE: High Line Voltage is required with this kit. Using Low Line Voltage will
halt the system. However if the total power usage is validated using the power
calculator, the system halt condition with Low Line Voltage may be overridden by
pressing "F9" to enter the RBSU and enabling the "Power Supply Override"
setting under "Advanced Options".
DA - 13046
Worldwide QuickSpecs — Version 25 — 8/16/2010
HP ProLiant DL785 Generation 5
488765-B21
416096-B21
412911-B21
AH267A
AH262A
AH270A
Page 22
Advertisement
