Line Keys - Verizon One Talk T46G User Manual

Wi-Fi connectivity
Before setting up a wireless broadband connection,
please make sure the One Talk desk phone is
connected to its power adapter and that no Ethernet
cable—either for wired Ethernet or PoE—is connected.
Insert the WF40 Wi-Fi USB dongle into the USB port in
the back of the phone. You should see the Wi-Fi signal
indicator appear in the notification bar.
1. From Basic settings, scroll to Wi-Fi and press
to select.
2. Use or the Switch soft key to enable or
disable Wi-Fi and press the Save soft key to accept
the changes.
The T46G desk phone will automatically scan for
nearby Wi-Fi networks. Select the network you wish to
connect to and enter your Wi-Fi password if required.
One Talk—T46G and T46GW desk phone user guide

Line keys

Your T46G comes with 22 configurable line keys.
You can use them to create one-button speed dials for
frequently dialed numbers. To view all lines, press the
1 2 3
Pages key on the idle screen to toggle to
additional line key pages.
Configure line keys for speed dial:
1. Press and hold an unused line key (for about five
seconds).
2. Use or the Switch soft key to scroll
through the type of line keys available until you
locate Speed Dial.
3. Scroll to complete each of the
following fields:
• Account ID: Select the phone line/number that will
dial out.
• Label: Enter the name you would like displayed on
the line key label.
• Value: Enter the phone number you would like this
line key to dial.
4. Press the Save soft key to accept your changes.
You can now use this line key to speed dial
this contact.
PREVIOUS | CONTENTS | NEXT 12