Declaration Of Conformity - Verizon One Talk T46G User Manual

Declaration of conformity

Hereby, Yealink Network Technology CO., LTD.
declares that this phone is in conformity with the
essential requirements and other relevant provisions of
the CE, FCC. You can find the CE and FCC information
from the label on the back of the IP phone.
CE mark warning
This device is marked with the CE mark in compliance
with R&TTE Directive 1999/5/EC.
Part 15 FCC Rules
Any changes or modifications not expressly approved
by the party responsible for compliance could void the
user's authority to operate the equipment.
This device is compliant with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference
received, including interference that may cause
undesired operation.
Class B digital device or peripheral
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
One Talk—T46G and T46GW desk phone user guide
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment
and receiver.
3. Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
4. Consult the dealer or an experienced radio/TV
technician for help.
Important safety precautions
Please read the following important safety notices and
instructions before installing or using the product.
• A DANGER warning refers to situations that could
cause bodily injury.
• A CAUTION warning refers to situations that could
result in equipment malfunction or damage.
1. Follow all warnings and instructions marked on
the product.
2. Unplug this product from the wall outlet
before cleaning.
Do not use liquid cleaners or aerosol cleaners.
Use an antistatic cleaning pad for cleaning.
3. Do not use this product near water.
4. Do not place this product on an unstable cart,
stand or table. If the product falls, it could be
seriously damaged.
5. This product should be operated using the type of
power indicated on the marking label. If you are not
sure of the type of power available, consult your
dealer or local power company.
6. Do not allow anything to rest on the power cord.
Do not locate this product where people will walk on
the cord.
7. Never push objects of any kind into this product
through cabinet slots as they may touch dangerous
voltage points or short-out parts that could result in
a fire or electric shock.
8. Never spill liquid of any kind into or onto the product.
9. Do not attempt to service this product yourself, as
opening or removing covers may expose you to
dangerous voltage points or other risks.
10. Refer all questions regarding servicing of this
product to qualified service personnel.
Danger–electric shock and fire
Electric current from power, telephone and
communication cables is hazardous, and could
result in electric shock and/or fire.
Learn more.
For more information, visit
www.onetalk.com
PREVIOUS | CONTENTS | NEXT 28