Speak normally into the microphone and gradually
increase the gain control knob on the IR receiver
10. Now you can adjust the volume control on the
Connection & Control Box.
Note: If necessary, you can also adjust the volume on
the speakers and any other audio sources that are
Connecting External Audio Devices
The pendant microphone allows you to amplify sound from an external audio device, such
as a computer or portable audio device. Follow the steps below to connect your external
audio device to the pendant microphone.
Turn off the microphone by pressing the power button.
Plug a 3.5 mm stereo mini cable into the headphone or line out jack on your audio
Note: If your audio device has RCA-style connectors, connect the device using an
RCA to 1/8-inch stereo mini "Y" cable.
Plug the other end of the cable into the pendant microphone's
Turn on the pendant microphone and start playback from your external audio device.
The audio is automatically played through the speakers connected to the Connection
& Control Box via the IR receiver module.