Cleaning - Philips sonicare HX9500 User Manual

10
10
Battery Charge Indicator
If the battery charge of your Sonicare is low, you will hear 3 beeps
,
after you have brushed your teeth for 2 minutes and the charge
indicator LED will blink yellow for 30 seconds.
A low charge indication signifies that 3 or fewer 2-minute brushings remain.
When not in use, you may keep your Sonicare in the charger to maintain a
full battery charge.
Multiple-LED charge indicator
When the handle is placed in the charger, the green charge indicator
,
LEDs will blink in a rising pattern as the battery charges. The number
of blinking LEDs indicates the level to which the battery has been
charged.
When the battery reaches full charge, the LEDs stop blinking and
illuminates continuously. About once a minute, the charge indicator LEDs
go out momentarily and then come back on. This indicates that the battery
is being maintained at full charge. The full charge indication will persist until
the handle is removed from the charger.
The blinking yellow LED indicates that fewer than 3 brushings remain.

Cleaning

By following these simple steps, you should get years of worry-free
brushing:
1 Rinse the brush head and bristles after each use, and air dry only.
 Clean the brush head at least once a week, including under the nut.