Clarke-tech C-Tech HD 6600 SST Manual page 11

6.1 Getting Started
Package Identifier (PID) Scan <Figure 6.1.12>
Select a transponder.
To change a transponder's information (Frequency, Symbol Rate), use the NUMERIC
buttons.
To add a new transponder, press the GREEN button.
To delete a transponder, press the YELLOW button with the cursor next to the
Frequency parameter.
To search a transponder, set its different parameters and press
search a specific channel of the transponder by setting its PID data (Video, Audio
and PCR).
<Figure 6.1.12>
Note : If you cannot access programs after correctly completing a scan procedure,
please contact your seller or your installer.
/ . You can
20
6.1 Getting Started
Fast Scan <Figure 6.1.13>
For Provider choose either Canal Digitaal or TV Vlaanderen.
For CHs Renumber select ON/OFF
Press the Red button.
<Figure 6.1.13>
6) Terrestrial Scan
Through this function, the receiver searches for all the available channels and saves them
in memory.
Auto Scan <Figure 6.1.15>
Press the YELLOW button when the selection bar is positioned on any item and
"Scanning menu" will appear on the screen. <Figure 6.1.16>
<Figure 6.1.15>
<Figure 6.1.14>
<Figure 6.1.16>
21