Table of Contents
Advertisement
9
info@FLIR-Direct.com
Operation
9.17 Changing the settings
9.17.1 General
You can change a variety of settings for the camera.
The Settings menu includes the following:
• Measurement parameters.
• Device settings.
9.17.1.1 Measurement parameters
• Emissivity: Default value: 0.95.
• Reflected temperature: Default value: 20°C (69°F).
• Distance: Default value: 1.0 m (3.3 ft.).
Note During normal operation there is typically no need to change the default measure-
ment parameters. For very accurate measurements, you may need to set the Emissivity
and/or the Reflected temperature. For more information, see sections 9.12 Setting the
emissivity as a surface property, 9.13 Setting the emissivity as a custom material, 9.14
Changing the emissivity as a custom value, and 9.15 Changing the reflected apparent
temperature.
9.17.1.2 Device settings
• Language, time & units:
◦ Language.
◦ Temperature unit.
◦ Distance unit.
◦ Date & time.
◦ Date & time format.
• Reset options:
◦ Reset default camera mode.
◦ Reset device settings to factory default.
◦ Delete all saved images.
• Auto power off.
• Display intensity.
• Camera information: This menu command displays various items of information about
the camera, such as the model, serial number, and software version.
9.17.2 Procedure
Follow this procedure:
1. Push the center of the navigation pad. This displays a toolbar.
2. On the toolbar, select Settings
3. In the dialog box, select the setting that you want to change and use the navigation
pad to display additional dialog boxes.
9.18 Updating the camera
9.18.1 General
To take advantage of our latest camera firmware, it is important that you keep your camera
updated. You update your camera using FLIR Tools/Tools+.
FLIR-DIRECT
#T810252; r. AA/41997/41997; en-US
. This displays a dialog box.
.com
1.888.475.5235
25
Advertisement
Table of Contents
