Panasonic BL-WV10A Setup Manual page 8

Wireless camera monitoring system

Hide thumbs Also See for BL-WV10A:

Table of Contents

Basic Setup

After the BL-WV10A starts up for the first time, the [Basic Setup] screen is displayed. Here you can set the

administrator user name and password. For most installations, other parameters do not need to be changed.

For information regarding Basic Setup settings, see page xx in the Operating Instructions.

1. Press [ENTER], use the navigator keys to select [Admin. User Name], then press [ENTER].

2. Enter an administrator user name (6 or more characters and/or digits), the press [STOP] to save the

setting.

3. Select [Admin. Password], then press [ENTER].

4. Enter an administrator password (6 or more characters and/or digits), the press [STOP] to save the

setting.

•

For instructions on entering characters using the remote control, see page xx.

5. Press [RETURN] to return to the top menu, use the navigator keys to select [Finished], then press

[ENTER].

Setup Guide

Table of Contents