Panasonic BL-WV10A Setup Manual page 7

Wireless camera monitoring system

Hide thumbs Also See for BL-WV10A:

Table of Contents

Setup Guide

Using an Optional BB-HGW700A

Connecting Cameras Using the BB-HGW700A

1. Connect the BL-WV10A to your TV using the included video cable.

2. Turn the TV on and set the TV's input switch to the external video input ("VIDEO", "EXT", "INPUT 1", etc.)

3. Set the mode switch on the rear of the BL-WV10A to [SETUP].

4. Connect the DC cord to the AC adaptor and to the power outlet.

5. Turn on the BL-WV10A by connecting the DC cord to the unit.

•

The startup screen appears on the TV screen.

6. Use an Ethernet cable to connect the BB-HGW700A to one of the LAN jacks on the BL-WV10A.

7. Connect the BB-HGW700A to the power outlet.

Table of Contents