Changing Settings Using Blackmagic Teranex Setup - Blackmagicdesign teranex mini Installation And Operation Manual

You'll find a switch settings diagram printed on the base of your converter. Ensure your switch
settings correspond to the legend by observing the switch numbers from 1 to 8, left to right.
When using the optional Teranex Mini Smart Panel, the switch settings will be overridden by the
Smart Panel settings. Your Teranex Mini will retain its last settings whether applied via switch,
Smart Panel or Blackmagic Teranex Setup software. If reverting to switch control after removing
the Smart Panel or updating your converter's settings via software, you may need to toggle
individual switches for new settings to take effect.
For a full description of the switches and their settings, refer to your converter model in this
manual. Even though switch settings are printed on the base of your converter, new features in
later updates can add new settings so it's worth checking the latest version of this manual for
the most up to date information. You can download the latest version from the Blackmagic
Design support center at www.blackmagicdesign.com/support
1 2 3 4 5 6 7 8
ON
Change settings by adjusting the switches with a pen.

Changing Settings using Blackmagic Teranex Setup

Once installed on your computer, connect the setup utility to your Teranex Mini via USB or
Ethernet. If you can't find your Teranex Mini via Ethernet, you may first need to configure it using
a USB connection as detailed in the section 'changing network settings.'
The first thing you'll see when launching the software is the home page. Here you can select
the Teranex Mini you want to configure. To change settings, click on the 'settings' icon below
the image of your Teranex Mini.
If you have more than one Teranex Mini connected to your network, only the relevant settings
for your selected Teranex Mini will be visible. Select your desired converter by clicking the
arrows on the left and right side of the Blackmagic Teranex Setup home page.
Adjustments will be immediately saved to your Teranex Mini. This means if power is lost, your
settings will be re-established as soon as power is restored.
The Teranex setup utility lets you update your Teranex
Mini's internal software and adjust your settings using
a Mac OS X or Windows computer.
HDMI OUT
ETHERNET PoE+ SDI IN SDI LOOP OUT
HDMI OUT
L - ANALOG
ETHERNET PoE+ SDI IN SDI LOOP OUT AES/EBU
L - ANALOG
AES/EBU
R - ANALOG
AES/EBU - T/C
R - ANALOG
AES/EBU - T/C
Changing Settings 10 10