Overview Of The Remote Control Buttons; Choosing A Language For The Tv Menu Screens - Sony KV-28DS20U Service Manual

Overview

Overview of the remote control buttons

To mute sound
Press to mute TV sound. Press again to
restore the sound.
To reveal on screen information
Press to reveal all on-screen indications.
Press again to cancel. In teletext mode,
press to reveal concealed information (eg
answers to a quiz) then press again to
cancel.
To select channels
Press the numbered buttons to select
channels.
For double digit programme numbers,
e.g.23, press -/-- first, then the buttons 2 and
3. If you enter an incorrect first digit, select
-/-- button again to enter the programme
number of your choice.
To select EPG
Press to display the Electronic Programme
Guide. Press again to remove display.
To select Teletext
Press to switch on Teletext.
To display picture menu
Press to change the picture settings. Press
the OK button to remove the display.
To display sound menu
Press to change the sound settings. Press the
OK button to remove the display.
To adjust TV volume
Press to adjust the volume of the TV.
10
The operating instructions mentioned here are partial abstracts from the 'Operating
Instruction Manual'. The page numbers of the 'Operating Instruction Manual' remain
as in the manual.
To temporarily switch off TV
Press to temporarily switch off TV. Press again to
switch on from standby mode. To save energy, we
recommend switching off completely when TV is not
in use.
NOTE: After 15-30 minutes without a TV signal and
without any button being pressed, the TV switches
automatically into standby mode.
To select input signal or freeze teletext
Press to select inputs from the TV sockets (see Using
Optional Equipment section). In teletext mode, press
to freeze the displayed page. Press once again to
cancel.
To return to previous channel
Press to return to the previous channel you were
watching. Note: This can be done only after watching
the present channel for 5 seconds.
To display the menu
Press if you wish to use the TV menu system. Press
again to remove the menu from the TV screen.
To select menu items
Use these buttons and the OK button to select the
options available in the menu system of this TV.
To change screen format
Press to change the size of the screen.
See Teletext section of manual for details.
To select channels
Press to select channels.
Additional TV Features

Choosing a language for the TV menu screens

The TV consists of a menu system which can appear on screen in a variety of languages. Use the following feature to select the
language that best suits you.
1. Press the MENU button on the remote control to display
the menu on the TV screen.
V v
2. Press the or buttons to select the
menu screen then press the
'PRESET' menu.
V v
3. Press the or buttons to select 'Language' on the
menu screen then press the
'LANGUAGE' menu.
V v
4. Press the or buttons to select your chosen language.
5. Press the OK button to confirm your selection.
6. Press the MENU button to remove the display from the
TV screen.
PICTURE CONTROL
Picture Mode Personal . . . . . . . . .
PICTURE CONTROL
Contrast
Picture Mode
Reset Contrast
Reset
FormatFormat
FormatFormat Wide
symbol on the
b
button to enter the
b
button to enter the
11
Personal . . . . . . . . .
Wide