Table of Contents
Advertisement
2.
Disconnect the WLAN antenna cable (1), and remove the tape (2) holding it in place, disconnect the
display cable (3), and then release the cable from the routing channels (4).
3.
Rotate the display assembly (1), and then remove the display assembly (2) from the base enclosure.
NOTE:
For display panel and display component removal procedures, see
Reverse this procedure to install the display assembly.
38
Chapter 5 Removal and replacement procedures for authorized service provider parts
Display panel on page
60.
- Quick Links:
- Product Description
- Battery
- Rtc Battery
Hide quick links:
Advertisement
Table of Contents
