Samsung FTQ387LWGX Service Manual page 54

4. Troubleshooting
4-2 Electrical Malfunction
Hot indicator Lamp failure (cooktop)
RC radiant element
(No heating or
Abnormal working)
* Disconnect power
* Get rid of lamp from harness and
open cooktop.
*Get rid of lamp from braker and
supply extra 120V voltage.
*Make sure whether lamp is lighted
when 120V voltage is supplied.
Yes
*Check whether harness has been
damaged or disconnected.
END
Fig. 16 The drawer of
connected wire of harness
Position
yellow+white or white
A
white or yellow+white
B
(*Warning : Having a short circuit of harness color to be turned "Yellow+White" might cause re or damage of in nite switch.)
No
WARNING
Color
Having a short circuit might cause fire or damage
of infinite switch if harness is misconnected during
cooktop is being worked.
54
END
Yes
*Replace Hot Indicator Lamp.
"B" "B"
"A" "A"
Hot Indicator Lamp Hot Indicator Lamp