Automatic Bobbin Winding - ELNA xquisit Service Manual

Elna International Corps. SA
1. Adjusting the inclination and the longitudinal position of thread retaining plate A, temporarily
determine the height and fix it.
2. Turn the bobbin thread intermediate gear by hand to move thread retaining plate A in the
state that the throat plate and the hook cover are attached.
3. Then temporarily determine the height of thread retaining plate A so that it can move from
the forward end position (above the inner hook) to the backward end position.
4. Insert a hexagon wrench key from the frame hole and loosen the thread retaining plate C
set screw to adjust the height.
Xquist

AUTOMATIC BOBBIN WINDING

Location of components to be adjusted.
1. Remove the under cover.
2. Remove the face cover inside.
3. Remove the belt cover.
4. Remove the free arm bottom cover.
5. Remove the front panel.
service manual