Fault/Alarm" Screen Selection; Fault/Alarm" Screen - Siemens SIMATIC HMI TP900 Operator's Manual

4.5

"Fault/Alarm" screen selection

4.5.1

"Fault/Alarm" screen

The "Fault/Alarm" screen displays the following information:
● Faults/alarms are displayed with the fault time, the fault number, the drive object and a fault
description.
● An alarm or fault is also displayed in the navigation bar in the "Fault/Alarm" field:
– A red square for an alarm
– A yellow square for a fault
Calling the screen
Press the <Fault/Alarm> button in the navigation bar.
①
②
Figure 4-10
You can find a description of the causes and the remedy for faults/alarms in the converter List
Manual.
TP900 Function Manual
Function Manual, 10/2016, A5E39487277A
Fault display in the main contents area. A = Alarm, F = Fault
Fault display in the navigation bar
Example: "Fault/Alarm" screen
4.5 "Fault/Alarm" screen selection
Screens
25