GUID-01750DAC-3408-4912-B936-7DAA79351AA9
Replacing the optical drive
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
GUID-77FB88EF-8522-4A35-8200-001B7A09A1B7
Procedure
1
Align the screw hole on the optical-drive bracket with the screw hole on the
optical drive.
2
Replace the screw (M2x2.5) that secures the optical-drive bracket to the optical
drive.
3
Align the tabs on the optical-drive bezel with the slots on the optical-drive
assembly and snap it into place.
4
Slide the optical-drive assembly into the optical-drive bay and align the screw
hole on the optical-drive bracket with the screw hole on the middle-frame base.
5
Replace the screw (M3x5) that secures the optical-drive assembly to the
middle-frame base.
6
Connect the optical-drive cable to the optical-drive assembly.
GUID-C4C95C69-EE42-42A9-8C3A-77B40DA4950B
Post-requisites
1
Replace the
back
2
Replace the stand.
26
computer. After working inside your computer, follow
After working inside your
cover.
computer. For more safety best
www.dell.com/
Before