Removing The Middle-Frame Base; Prerequisites; Procedure - Dell Inspiron 24 5000 Service Manual

GUID-061A49E3-FE8B-4D53-BAD8-90A41D093CCC

Removing the middle-frame base

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
GUID-8811A95A-78B1-4766-AC04-F79156C50266

Prerequisites

1 Remove the stand.
2 Remove the back
3 Remove the optical
4 Remove the hard
5 Remove the wireless
6 Remove the heat
7 Remove the fan.
8 Remove the system
9 Remove the VESA-mount
10 Remove the speaker
GUID-098286EC-9305-46B3-8B39-D2D18708C2BE

Procedure

1 Note the routing of the antenna, camera and microphone, touch-screen board,
optical drive and hard drive cables, and remove the cables from the routing
guides on the middle-frame base.
2 Disconnect the touch-screen board and display-backlight cables from the display
panel.
76
computer. After working inside your computer, follow
After working inside your
cover.
drive.
drive.
card.
sink.
board.
bracket.
cover.
computer. For more safety best
www.dell.com/
Before