Specifications - Sony BKM-61D Operation Manual

Assigning input signals to connectors
After installing the BKM-62HS in the video monitor, make
necessary settings for each input channel using the INPUT
CONFIGURATION menu of the monitor. The BKM-
62HS may not work properly without the settings.
For details on INPUT CONFIGURATION menu, see "C
Setting the Input Configuration – INPUT
CONFIGURATION Menu" in the Operation Manual for
your monitor.

Specifications

General
Voltage +5 V, ±6 V (supplied from the monitor)
Power consumption
5.5 W max.
Operating conditions
Temperature 0°C to 35°C (32°F to 95°F)
Optimum temperature
20°C to 30°C (68°F to 86°F)
Humidity 0% to 90% (no condensation)
Pressure 700 hPa to 1060 hPa
Storage and transport conditions
Temperature –10°C to 40°C (14°F to 104°F)
Humidity 0% to 90%
Pressure 700 hPa to 1060 hPa
Maximum external dimensions (w/h/d)
25 × 256 × 248 mm
1
(1 × 10
Mass approx. 910 g (2 lb)
Input/output connectors
Digital input BNC × 2 (75 ohm), with monitor
output
Signal characteristics
HD digital component signals
HD SDI reception characteristic:
Input impedance
75 ohm unbalanced
Data rate 1.4835 Gbps to 1.485 Gbps
Monitor output:
Output signal amplitude
800 mVp-p ±10%
Output impedance
75 ohm unbalanced
Frequency characteristics
Y: 48 Hz to 30 MHz ±1 dB
P /P : 48 Hz to 30 MHz ±1 dB
B R
G/B/R: 48 Hz to 30 MHz ±1 dB
Chrominance signal/luminance signal
Delay time error
10 nsec max.
7
/ × 9 / inches)
8 8
Gain error 3% max.
Aperture compensation
6 dB min. (25 MHz)
Quantization 10 bits/sample
Transmission distance
100 m (approx. 328 ft) max. (When
using 5C-FB coaxial cables (Fujikura,
Inc.) or equivalent.)
Return loss –15 dB max. (5 MHz to 1.485 GHz)
SD digital component signals
Sampling frequency
Y: 13.5 MHz
R-Y/B-Y: 6.75 MHz
Frequency characteristics
Y: 50 Hz to 5.75 MHz ±1 dB
R-Y/B-Y: 50 Hz to 2.75 MHz ±1 dB
Chrominance signal/luminance signal
Delay time error
30 nsec max.
Gain error 5% max.
Aperture compensation
6 dB min. (5 MHz)
Quantization 10 bits/sample
Transmission distance
200 m (approx. 656 ft) max. (When
using 5C-2V coaxial cables (Fujikura,
Inc.) or equivalent.)
Return loss –15 dB min. (5 to 270 MHz)
Accessories supplied
Operation Manual (1)
Design and specifications are subject to change without
notice.
BKM-62HS HD SDI/SDI Input Adaptor
19