Sd Card Format & Set Breaking Voltage - WINYCAM V200HD User Manual

SD card format & Set breaking voltage
▶ SD Card Format
1. On PC
Connect the Micro SD card
to your PC, and click
on 'My Computer'.
The Original PC Viewer Program is in the packaged SD card. If you format the SD card, this program will be
deleted. Please save a user manual data and an original viewer PC viewer program to your PC for backup.
When format SD card in PC, please select a system as FAT32.
please format as 64KB for assigned unit, if you set other format, it may cause SD card error or SD card dis-
recognition.
2. Format on V200HD
Format the SD card on a device. (Menu > Other Setting > SD Card Format)
▶ To set car constant power discharge protection function
This device has the built-in car constant power discharge protection
function, and therefore does not require an extra device to
cut off constant power.
Set a breaking voltage value on V200HD or PC viewer.
(Please note to set value based on a type of car or
An age of car.)
Right-click 'Removable
Disc' and select on
'Format' from the menu.
1. Configuration on V200HD
Menu > System > Cut off voltage
2. PC Original Viewer
Operating Configuration > Breaking Voltage
It may have some differences depend on a type of car or an age of car.
(Breaking Voltage Value : 11.8V, 11.9V, 12.0V, 12.1V, 12.2V, Deactivate)
Press "Start" to format
.