Sd Card Format & Set Breaking Voltage - WINYCAM Winner User Manual

3-21. SD card format & Set breaking voltage
1. SD Card format
Format a Micro SD Card on the device. (Menu > Others > SD Card Format)
The setting value will last when SD Card Format menu is used.
2. How to install Constant power discharge protection function
This device has the built-in vehicle constant power discharge protection function, and therefore does not
require an extra device to cut off constant power. Set a breaking voltage value on Winner or PC viewer.
(Please note to set value based on a type of vehicle or An age of vehicle.)
1) Configuration
Menu > System Set > Cut Off Voltage
2) PC Viewer Program
Configuration > Breaking Voltage
There are some differences depend on a type of vehicle and vehicle age.
(Cut off Voltage :
11.4(23.1) / 11.6 (23.4) / 11.8(23.7) / 12.0(24.0) / 12.2(24.3) / Off)
※ If vehicle detect lower voltage than your set voltage, the power will
not cut off soon. (When cat detect set voltage around for 5min to
5min 30sec, voltage will be cut off.
36
WINYCAM Winner