Safety Precautions - WINYCAM V200HD User Manual

Safety Precautions

Operational and Security Precaution
• Do not operate the product during driving. It may cause accident.
• The product must be installed at a point which would not obstruct the driver's view.
• Do not allow unauthorized disassembly or alteration to the product. It may cause malfunction, and the consequent
product damage will not be covered under the warranty.
• If the product is damaged or power is cut off by a serious accident, the product may not be able to record such event
• Always keep the windshield clean to enable clear recording.
• Since the product is purpose to record video data during driving, video quality may be deteriorated when in/out the tunnel,
and at night or by contrast and backlight.
• Contaminated camera lens may deteriorate the video quality. Keep the lens clean.
• Do not place the product under direct sunlight or inside the closed vehicle as it may cause malfunction.
• Do not use chemicals or detergent to clean the product. Clean gently with soft cloth.
• Use of the product at temperature below -20℃ or above 60℃ may cause malfunction or breakdown.
(This caution should be applied when product is unused.)
• Do not use the product in places in high temperature/humidity.
• Do not exert excessive force to the product (especially to LCD buttons and to bracket) as it may cause breakdown.
• Operate the product for 3-5 minutes to check for correct recording, before each use.
• Extended exposure to sunlight and high temperature in the summer may cause malfunction.
• Do not turn off power, or remove the SD card during firmware upgrading as it may cause malfunction.
• Do not touch the cigar lighter cable with wet hand as it may cause electric shock.
• Do not use a damaged cigar lighter cable as it may cause electric shock or fire.
• Do not place the cigar lighter cable in near heating devices.
• Do not leave the product connected to the cigar lighter if not in use for a long period of time.
Remove the cable from the product.
• Insert the cigar lighter securely.
• Do not bend or pull the cigar lighter cable by excessive force, or place heavy objects on the cable.
(It may damage the cord and as a result it may cause electric shock or fire.)
• Do not touch the LCD excessive force as it may cause malfunction.