Firmware Upgrade - WINYCAM V200HD User Manual

Firmware Upgrade

• Auto Firmware Upgrade
1) Remove the SD card from the black box after turning off the power completely.
2) backup all files that are stored in the files to your PC.
3) Format a SD card on PC. (Please refer "how to format" in the quick guide)
4) Download the latest firmware from our website (http://winycam-eng.com) and copy to a SD card.
5) Insert the SD card to V200HD. After power ON then firmware will be updated automatically.
6) During firmware updating, a voice guide will be announced and updating massage will be displayed ion LCD.
7) When the firmware update is completed, V200HD will be initialized and a voice guide will be announced
• Manual Firmware Upgrade
1) Insert a SD card which new firmware is stored to V200HD.
2) "Menu > Other Setting > FW Update"
3) Same progress as above step (6) in auto firmware update.
Caution
- After firmware update completed, the touch calibration will run to ensure for accurate touch sensitivity. Press the "DONE"
button after thatching 4 yellow points to finish the Touch Calibration properly. If you have pressed "RESET" button by
mistake, V200HD will re-boot and complete the Touch Calibration procedure.