Do you have a question about the HX200 and is the answer not in the manual?
Questions and answers
Михаил
January 26, 2025
Как сделать так, чтобы видео при движении постоянно отображалось на экране видеорегистратора? Спасибо!
1 comments:
Mr. Anderson
February 10, 2025
To keep the video constantly displayed on the screen of the WINYCAM HX200 dash cam while in motion, access the LCD Configuration Menu and select the Live Image option. This setting ensures that the live video feed remains visible on the screen.
7. External GPS Installation 22. Certificates 8. How to Record 23. A/S Guide 9. REC Time Warranty 10. LED Operation Guide 11. Voice Guide 12. LCD Configuration 13. PC Viewer Program Installation 14. How to use PC Viewer 15. Playback WINYCAM HX200...
Use of the product at temperature below -20℃ or above electric shock or fire.) 70℃ may cause malfunction or breakdown. (This caution should be applied when product is unused.) Do not use the product in places in high temperature/ humidity. WINYCAM HX200...
Page 4
After turning on the power, make sure that it is in normal operation. Please note that the warranty period of an SD card is six (6) months, and replace it at the time of more than six (6) months. Please purchase and use SD Card that manufacture recommended specification. WINYCAM HX200...
Please read carefully before use. current state of the product, and may contain typographical errors or omissions. HX200 is an auxiliary product to alert users for safe driving and prevent accidents, by recording Contents of this User Manual may be modified, video on driving.
PC. ㆍSecurity LED light are built-in front body (LED Lighting ㆍEach capacity of a constant(normal)/ event/ motion folder function On/Off can be set in PC viewer / LCD menu) can be set in PC Viewer WINYCAM HX200...
Micro SD Card & Adaptor Optional Item Cigar Lighter Cable GPS Module ㆍThe packaged product picture of the user manual may differ from the actual product. ㆍVideo input type is different and check the user manual of monitor. WINYCAM HX200...
(Check the defection of SD card.) 4. Attach the bracket on the windshield 6. Arrange the wire using by the cable 5. Plug the cigar jack cable into car power of the left of center behind the rearview clip. socket. mirror. WINYCAM HX200...
Page 10
Plug (ㅡ) shape's rear end of the plug to Arrange the wire by using the cable clip. to record properly. the camera connection, (ㄱ) shape's one to the device. ※Caution ※ Please noted that if the direction changes, the video will not be output. WINYCAM HX200...
Page 11
1. How to install a Fuse Cable Fuse cable has 3 lines. ( To use hardwire cable) Battery Line (Red) : Connect to Emergency Light ACC Line (Yellow) : Connect to Fuse Power Ground Line (Black) : GND WINYCAM HX200...
Keep its distance from them as much as possible. ㆍ GPS may be affected by weather conditions, satellite signal, or surrounding geographical features. Coated windshields can interfere with GPS signal which may result in poor or blocked GPS reception. WINYCAM HX200...
8. How to Record 1. Recording : HX200 is automatically boot at power on, and an Normal recording starts as an initial recording mode. 2. Recording Mode : It is classified into driving recording mode and Parking (motion) recording mode.
ㆍBy Type: When saving a recording file, set the memory usage ratio by recording type. if the memory space is full then the recording files are automatically deleted sequentially. Therefore, accident video recording files may also be deleted.. WINYCAM HX200...
“ The recording will start” REC end “ The recording will end” when an event shock detection “ Ding-Dong” ※ Only when event REC mode is set in the configuration, the voice guiding "event recording will start“ will announce WINYCAM HX200...
High Temp Cut off Alert Set ADAS Alert ON/OFF ADAS Set Speaker Volume Speaker Volume ADAS Setting Set the detection area to operate ADAS Camera Set Camera Set Adjust Brightness, Contrast, Chroma on Camera FVSA Set FVSA Warning during Driving WINYCAM HX200...
DirectX support (WPF) 2. Install Download the latest Winy BB Viewer from our website (http://www.winycam.com) If you run “setup.exe”, Winy BB Viewer will be installed And then, installation will be continued according to the installation sequence of setup dialog box.
14. How to use PC Viewer 2 3 4 5 6 13 14 15 16 WINYCAM HX200...
Page 20
Play List / Map Button File Location Search GPS Signal Condition Driving Speed REC File List / Map Display Playback Control Latitude / Longitude Full Screen G-sensor Information Flip Horizontal Playback Video Image Flip Vertical File Skip Back WINYCAM HX200...
LIVE Button Back to list Front / Rear Button Toggle Front / Rear video diplay Former File Button Playback Former file Playback Button Playback REC file Next File Button Playback Next file Back Button Back to list tab WINYCAM HX200...
Page 22
: Motion REC which is detected by motion detection sensor. (Parking mode) : Event REC which is detected a shock by shock sensor. GPS Information is displayed in the original viewer. You can check only front REC when playing by a video player. WINYCAM HX200...
Page 23
2) PC Viewer Program Click the icon to operate the viewer program. 3) Find a REC file location Click “FILE LOCATION” in the viewer program on upper right. Choose the file location, video file list will be show WINYCAM HX200...
When you touch in the upper-right-hand corner of the screen (1/4 of whole screen), LCD Screen will change automatically Front/Rear, only Front, only Rear. Only LCD Screen looks different, 2CH images will be recorded when rear camera is connected. Rear Front Front/Rear LCD Screen Rear Front Rear LCD Screen Front LCD Screen WINYCAM HX200...
2) Go to the folder where recorded video files are saved. 3) Create the new folder in same location. 4) Drag the particular file to the new file to copy. (If you drag a folder, the whole folder will be copied.) WINYCAM HX200...
18. How to separate video 1) Press “Front & Rear Extract” button on the original PC viewer program. 2) Select a video file to separate and click “OK” button. 3) Saved separated file in(ex: C:\Users\AppData\Roaming\WINYCAM\Video) WINYCAM HX200...
1) Remove the Micro SD card from the device after power off. 2) Connect it to the PC and format the memory card after back up data. 3) Visit WINYCAM website (http://winycam.com) and downlaod the latest firmware on the memory card.
1) Configuration 2) PC Viewer Program Menu > System Set > Cut Off Voltage Operating Configuration > Breaking Voltage * Setting Value : Disable / 11.4(23.1) / 11.6(23.4) / 11.8(23.7) / 12.0(24.0) / 12.2(24.3) WINYCAM HX200...
Cut-OFF Display (LCD) 3.5" TFT LCD with TSP (480 x 320) Option) : OFF, 11.4V(23.1), Voltage Cut-OFF 11.6V(23.4), 11.8V(23.7), 12.0V(24.0),12.2V(24.3) External GPS (option) Operating Power Input DC 12V~24V -20℃ ~+70℃ Temperature Storage Battery Super Capacitor -30℃ ~+80℃ Temperature WINYCAM HX200...
3. If the constant power protect function is set ‘OFF’, monitoring during parking will be performed only for a certain period of time. If the vehicle battery voltage is lowered for self-protection, power to the device may be disconnected even in the Parking Mode disabling the recording. WINYCAM HX200...
3) If failures caused by natural disasters (fire, lightning, flood damage, etc. 4) Failures caused by the malfunction of power in use and connected equipment. Please keep this “Warrantee” because we will not be able to re-issue this warrantee note. WINYCAM HX200...
Need help?
Do you have a question about the HX200 and is the answer not in the manual?
Questions and answers
Как сделать так, чтобы видео при движении постоянно отображалось на экране видеорегистратора? Спасибо!
To keep the video constantly displayed on the screen of the WINYCAM HX200 dash cam while in motion, access the LCD Configuration Menu and select the Live Image option. This setting ensures that the live video feed remains visible on the screen.
This answer is automatically generated