Firmware Upgrade - WINYCAM HX200 User Manual

19. Firmware Upgrade

1. Auto Firmware Upgrade
1) Remove the Micro SD card from the device after power off.
2) Connect it to the PC and format the memory card after back up data.
3) Visit WINYCAM website (http://winycam.com) and downlaod the latest firmware on the
memory card.
4) Insert the Micro SD card onto the device and power on. Automatic upgrade will begin.
5) While upgrading the firmware, a voice guidance announces an upgrade status.
6) Once upgrade is complete, the device reboots and starts normal recording.
26
WINYCAM HX200