Setting The Print Head Gap - Tally T2150 Quick Start Manual

Quick Start-up
Setting the print head
The printer features automatic print head gap adjustment to the thickness of the paper used (AGA
gap funcion). In setup mode, you can enter a correction value to modify the head gap determined
automatically. This correction is useful for modifying the appearance of the type face and the
impact force for multi-layer paper.
The AGA (automatic gap adjustment) function must be set to "always" or "once". For more
details, refer to the User Guide on the online CD-ROM.
Adjust Paperway
Menu Char Online
1 2 3 4
Setup
TOF
Head Tear Online
1 2 3 4
Setup
Head= 0 *
Set < > Exit Online
3
1 2 4
Setup
Press the Setup key. The printer changes to setup mode.
Press the Adjust (2) key.
Press the Head (1) key.
>
Use the < (2) or (3) key to set the range within which the automatic gap
adjustment is to be corrected. You can select a value from -10 to +10. Values
from 0 to -10 reduce the distance between the print head and the paper, positive
values increase the distance.
Confirm the setting by pressing the Set (1) key.
Press the Setup key. The printer is reset to the initial status.
Settings
S H
L I
G
E N
21