Changing The Ribbon Cassette - Tally T2150 Quick Start Manual

Quick Start-up
Changing the
Remove all the paper from the printer and make sure that the printer is switched off before
ribbon cassette
opening the cover.
90°

Changing the ribbon cassette

Press the two slide latches, raise the top cover to an angle of
90 degrees relative to the top cover of the printer and remove it.
Cautiously slide the print head carriage to the left stop (viewed
from the printer front).
The print head becomes hot during printing. You
STOP
should therefore let it cool down for some time before
touching it.
Raise the printer bar cover and remove the used cassette.
We recommend use of genuine ribbon cassettes only.
S H
L I
G
E N
11