Upper Push Tractor Installation (9058D Model Only) - Compuprint 9058D User Manual

9. Turn the ribbon winding knob again in the direction of the arrow to take
up slack in the ribbon.
10. To ensure that the ribbon guide runs freely along the ribbon, manually
move the print carriage horizontally.
If you need to replace the used ribbon cartridge, see "Replacing The Ribbon
Cartridge".

Upper Push Tractor Installation (9058D model only)

An additional push tractor is provided with the 9058D printer. This second
push tractor unit can be installed in front position (on the lower push
tractor).
1. Find the upper push tractor
among the accessories.
2. Install the upper push tractor aligning both its hooks with the lower push
tractor pins and inserting them into the corresponding pins. Push the
upper tractor until it is fully engaged. Insert the connector cable in the
electrical connector located in the lower push tractor.
L ow e r Tra ctor P in
U p pe r Tra ctor H oo k
A78408098-005
Setting Up Your Printer
E lec trica l C on ne ctor
C o nn ec to r C a ble
9