Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Lincoln Manuals
  4. Automobile
  5. LS 2000
  6. Workshop manual

Lincoln LS 2000 Workshop Manual

Hide thumbs Also See for LS 2000:
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual
2000 Lincoln LS Workshop Manual
SECTION 303-01A: Engine — 3.0L (4V)
IN-VEHICLE REPAIR
Intake Manifold — Upper
Removal
1. Disconnect the battery ground cable. For additional information, refer to Section 414-01.
2. Drain the engine cooling system. For additional information, refer to
3. Remove the engine appearance cover.
4. Remove the air cleaner outlet tube. For additional information, refer to
5. Disconnect the throttle position (TP) sensor and the idle air control (IAC) solenoid electrical connectors.
6. Disconnect the accelerator and speed control cables.
7. Remove the cable bracket.
1. Remove the bolts.
2. Remove the bracket.
8. Disconnect the throttle body hoses.
1. Disconnect the coolant hoses.
2. Disconnect the positive crankcase ventilation (PCV) hose.
3. Disconnect the vapor purge hose.
9. Disconnect the vacuum hose.
http://www.fordtechservice.dealerconnection.com/pubs/content/~WSYX/~MUS~LEN/21/...
Section
303-03.
Section
303-12.
Page 1 of 8
2000 Lincoln LS Workshop Manual
Procedure revision date: 03/17/1999
9/18/2008

Advertisement

loading

Related Manuals for Lincoln LS 2000

Summary of Contents for Lincoln LS 2000

  • Page 1 2000 Lincoln LS Workshop Manual Page 1 of 8 SECTION 303-01A: Engine — 3.0L (4V) 2000 Lincoln LS Workshop Manual IN-VEHICLE REPAIR Procedure revision date: 03/17/1999 Intake Manifold — Upper Removal 1. Disconnect the battery ground cable. For additional information, refer to Section 414-01.
  • Page 2 2000 Lincoln LS Workshop Manual Page 2 of 8 10. Disconnect the EGR to exhaust manifold tube nut. 11. Remove the cowl vent screen. For additional information, refer to Section 501-02. 12. Remove the brace. 13. Remove the vacuum hoses from the mounting bracket.
  • Page 3 2000 Lincoln LS Workshop Manual Page 3 of 8 17. Remove the fuel pressure sensor shield. 1. Remove the nut. 2. Remove the bolts. 3. Remove the shield. 18. Disconnect the vacuum hose from the rear of the upper intake manifold.
  • Page 4 2000 Lincoln LS Workshop Manual Page 4 of 8 23. Remove the bolts and the upper intake manifold. Inspect the gaskets and discard as necessary. Installation 1. Position the upper intake manifold and gaskets. 2. Install the fuel pressure sensor shield.
  • Page 5 2000 Lincoln LS Workshop Manual Page 5 of 8 6. Install the upper intake support bolt. 7. Connect the exhaust vacuum regulator (EVR). 1. Connect the electrical connector. 2. Connect the vacuum line. 8. Connect the intake manifold tuning valve (IMTV) electrical connector.
  • Page 6 2000 Lincoln LS Workshop Manual Page 6 of 8 12. Position the accelerator and cruise control cables and install the bracket. 13. Clip the vacuum hoses into the mounting bracket. 14. Install the brace. 15. Install the cowl vent screen. Refer to Section 501-02.
  • Page 7 2000 Lincoln LS Workshop Manual Page 7 of 8 19. Install the cable bracket. 1. Position the bracket. 2. Install the bolts. 20. Connect the accelerator and speed control cables. 21. Connect the TP sensor and the IAC solenoid electrical connectors.
  • Page 8 2000 Lincoln LS Workshop Manual Page 8 of 8 http://www.fordtechservice.dealerconnection.com/pubs/content/~WSYX/~MUS~LEN/21/... 9/18/2008...