Safety And Warranty; Safety Text - Vertu SIGNATURE S VM-06 User Manual

Safety and warranty

Safety text

The sales package may contain several different products and parts (hereafter known collectively as the
"Product"), for example a phone with various chargers. The following simple guidelines are intended to
cover all products and parts. Not following the guidelines may result in risks to personal safety or data,
damage to the Product, or in non-compliance with legal requirements.
Medical considerations
The operation of radio transmitting equipment, including wireless phones, may interfere with the function of
inadequately protected medical devices. Consult a physician or the manufacturers of the medical devices
to determine whether they are adequately shielded from external RF (Radio Frequency) energy.
Manufacturers of medical devices recommend a minimum separation of 15.3 centimetres (6 inches)
between a wireless device and an implanted medical device, such as a pacemaker or implanted
cardioverter defibrillator. Persons who have such devices should also:
Not carry the phone in a breast pocket.
l
Hold the phone to the ear opposite the medical device.
l
Turn the phone off if there is any reason to suspect interference.
l
Follow the manufacturer's instructions for the implanted medical device.
l
If you have any questions about using your wireless device with an implanted medical device, consult your
health care provider.
To prevent possible hearing damage, do not listen at high volume levels for
long periods. When you use the headset, your ability to hear outside sounds
may be affected. Do not use the headset where it can endanger your safety.
Listen to the headset at a moderate level, and do not hold the device near your
ear when the loudspeaker is in use.
HAC Hearing Aid Compatibility (HAC) for digital handsets
FCC's wireless hearing aid compatibility rules ensure that consumers with hearing loss are able to access
wireless communications services through a wide selection of handsets without experiencing disabling
radio frequency (RF) interference or other technical obstacles.
To define and measure the hearing aid compatibility of handsets, FCC references ANSI C63.19 2007
version and 2011 version; ANSI C63.19 standard specifies testing procedures for determining the M-rating
and T-rating of the digital handsets.
A handset is considered hearing aid-compatible for acoustic coupling if it meets a rating of M3 or M4, under
the ANSI C63.19. A handset is considered hearing aid-compatible for inductive coupling if it meets a rating
© 2017 Vertu Corporation Limited. All rights reserved.
Safety and warranty
64