Quick Installation - ViewSonic Office Theater PJ820 User Manual

Quick Installation

ViewSonic PJ820
Look for the serial number on the bottom
1
of the PJ820 Projector. Please write it in
the space provided (page ii, For your
records) in front of the user's guide.
Read the user's guide thoroughly before
2
installing the projector. Before connecting
the projector, be sure all video and audio
sources are turned off.
If one of the sources
is a computer, is it an
IBM ® or compatible?
Yes
Connect the audio and video signal
3 source(s), such as computer(s), VCR(s),
Laser Player(s), audio system, etc.
following the instructions on the next
pages.
4 Turn all audio and video sources on.
Then, turn the PJ820 LCD Projector
on.
5 If error message "No Signal" appears,
See Troubleshooting (Chapter 4).
6
6
Adjust user controls according to
personal preference. (see Chapter 2)
Is the image
satisfactory?
Yes
Installation is complete.
Enjoy your new PJ820
Color LCD Projector!
No
2
Macintosh ® users, contact ViewSonic
Chapter 4) to order a ViewSonic Macintosh Kit
a
(Part No. PJMAC1).
No
See
6
Troubleshooting
a
(Chapter 4).
® (see
Getting Started
3