Advertisement
H04760:03/09
•
7001 Wooster Pike, Medina, OH 44256 USA
tHis is tHe Assembly instrUctions
For cribs solD in tHe UniteD stAtes
A
Directions for Maintenance, Cleaning, Storage and Use of your Crib are also included.
BEFORE STARTING THE ASSEMBLY PROCEDURE, READ ALL DIRECTIONS WITH CARE.
#1 and #2 Phillip Screwdrivers
P
(8) Allenhead Bolts
(actual size)
(2) Allenhead Bolts
(actual size)
I
(2) Stationary Sides
Division of Foundations
•
www.child-craft.com / www.foundations.com
D
ssembly
irections AnD
YOU WILL NEED THE FOLLOWING FOR THE ASSEMBLY OF YOUR CRIB/DAYBED:
Slotted Screwdriver
e
H
Arts
ncloseD in
ArDwAre
A
(2) Allen Wrenches
F
P
Arts
(2) Head / Foot Finish
SI NCE 1954
Worldwide, Inc.
®
•
PH: +1 330.722.5033
7/16" Wrench
b
(
Ag
noted when sown actual size
B
G
(2) Allenhead Bolts
(actual size)
e
c
ncloseD in
Arton
J
TM
•
FAX: +1 330.722.5037
P
l
Arts
ist
Enclosed Allen Wrenches B
)
C
(8) Insert Nuts
(actual size)
(2 K/D Bolt Plugs
(actual size)
Pouch
(1) Spring
(storage for
Assembly Directions)
L
(1) Crib Stretcher
1
c
/D
rib
AybeD
10021
(4) Hex Head
D
Machine Screws
H
K
(for use with Daybed only)
SI328D
Advertisement
Table of Contents
Related Manuals for Child Craft 10021
Summary of Contents for Child Craft 10021
- Page 1 H04760:03/09 AybeD 10021 SI NCE 1954 Division of Foundations Worldwide, Inc. ® • • • 7001 Wooster Pike, Medina, OH 44256 USA PH: +1 330.722.5033 FAX: +1 330.722.5037 • www.child-craft.com / www.foundations.com tHis is tHe Assembly instrUctions For cribs solD in tHe UniteD stAtes...
- Page 2 H04760:03/09 rePArAtion Carefully remove and lay out all hardware and parts. During the assembly process, when using screws or bolts (fastening devices), check each with P list by letter and size. Identify by placing each fastening device on the diagram of Arts ncloseD in ArDwAre...
- Page 3 H04760:03/09 3: F inisHing oUcHes Place a purchased mattress on Spring K and crib is ready for use. After completing crib assembly, and after making yourself aware of the Warnings, Cautions, Cleaning, Storage, Use and Maintenance of crib, store the assembly directions in the pouch which was pre-attached to Spring K. For future referral to assembly directions you will only need to remove them from the pouch.
- Page 4 H04760:03/09 MAINTENANCE OF YOUR CRIB/DAYBED: Upon completion of assembly be sure all screws, bolts and fastening devices have been tightened securely. A periodic check should be made of fastening devices and tighten if needed. Before each usage or assembly, inspect crib for damaged hardware, loose joints, missing parts or sharp edges.
- Page 5 H04760:03/09 WARNING • FAILURE TO FOLLOW THESE WARNINGS AND THE ASSEMBLY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. WARNING: Infants can suffocate on soft bedding. NEVER add a pillow or comforter. NEVER place additional padding under an infant. •...
Need help?
Do you have a question about the 10021 and is the answer not in the manual?
Questions and answers