King Canada 8352 Instruction Manual page 8

OPERATION
DUST EXTRACTION
The dust extraction adapter together with an external vacuum cleaner takes care of the dust
extraction of the working surface.
1. Place the adapter (4) on the dust extraction connection (3).
2. Slide the hose of a domestic vacuum on the dust extraction adaptor (4).
3. When you finish the work, please take off the back adaptor and clean the dust extraction
connection.
4
3
SANDING PAINT
Sanding of lead based paint is NOT RECOMMENDED due to the difficulty of controlling
the contaminated dust. The greatest danger of lead poisoning is to children and pregnant
women.
Note:: Only dust masks suitable for working with lead paint dust and fumes should be used.
Ordinary painting masks do not offer this protection. Consult your local hardware dealer.
Warning! NO EATING, DRINKING or SMOKING should be done in the work area to prevent
ingesting contaminated paint particles. Workers should wash and clean up BEFORE eating,
drinking or smoking.
MAINTENANCE
Keep your machine as clean as possible by wiping with a clean cloth and blowing through
it with air after every 5 hours of use. Don't use harsh chemicals or solvents to clean the
tool. These chemicals could seriously damage the plastic. Keep the vents clear of dust and
debris. This will help prevent possible electrical shorts and ensure proper cooling. Keep
the tool housing clean and free or oil and grease using mild soap and a damp (not wet)
cloth. Inspect the cord regularly and have it replaced by an authorized service center if it is
damaged. Lubrication for this tool is done at the factory and should not be necessary again
under normal use.
CLEANING
Use mild soap and a damp cloth to clean the sander. Do not use petrol, turpentine, lacquer,
paint thinners or any other substance that could damage the plastic housing. Do not let
liquid get inside the sander. Never immerse the sander in liquid.