Setting Date And Time - Hunter 47905 Owner's Manual

Once you install the batteries, the thermostat will prompt you to set the current date,
time, and system type.
1. "01" for current day will be flashing. Use the
day, then
Next
you to time setup.
2. Use the or
to advance to hours, and again to set minutes. Pressing
you to system setup.
3. Press [conventl] or [heat pump] to select your system type. You may also use the
or buttons to make your selection.
Note: At anytime, if you see the
information about that setup, scheduling step, or menu option.
4. If you selected [conventl], select [gas/oil] or [electric] as your furnace type.
Note: Furnace type should be [electric] for heat pump systems.
5. Press . Choose [Schedule] if you want to setup your schedules or [manual]
Next
to set one temperature and ignore scheduling. Press
Schedule" on page 12 if you chose [Schedule] or use the
your temperature and press
8
Setting Day and Time
to move to month, and then year, until each is set.
buttons to set the current time of day, AM or PM and then use
Done
44119-01 • 10/10/2012
or
icon on the screen, you can press it for more
?
for [manual] mode.
button to select your current
will advance
Next
again will advance
Next
and See "Setting Your
Next
or buttons to set
Next