Hunter 47905 Owner's Manual page 14

6. Set the temperature for your heating cycle as indicated by the flashing "Heat to"
icon on your screen. Use
press .
Next
7. You will be asked to set your cooling cycle, indicated by the flashing "Cool to". Set
this temperature with your
8. The thermostat will start this process again for "Asleep". Repeat steps 1-9 to
schedule the time and set the temperature for your sleep period. When finished
press to get to "At Home"
Next
9. When setting "At Home", you will only be asked to set a temperature. The thermostat
calculates your "At Home" time by what remains unscheduled from your "Away"
and "Asleep" periods. Set your "Heat To" temperature first and press
your "Cool To" temp and press
Note: You do not have to schedule all periods in order. Press any scheduled period
on the scheduling screen to bypass the others if you only need to make a single change
or you can press
14
Setting Your Schedule
the
or
Done
to exit.
Done
44119-01 • 10/10/2012
and buttons to change the temperature and
buttons and hit
Next
To finish Scheduling your current day.
.
, then Set
Next