LG fh695bdh6n Owner's Manual page 39

Symptoms
Washing machine
does not start
Washing machine
will not spin
Door does not
open
Wash cycle time
delayed
Fabric softener
overflow
Softeners
dispensed too
early
Dry problem
Reason
Electrical power cord may not be
plugged in or connection may be
loose.
House fuse blown, circuit breaker
tripped,or a power outage has
occurred.
Water supply tap is not turned on.
Check that the door is firmly shut.
Once washing machine has started,
the door cannot be opened for safety
reasons.
If an imbalance is detected or if the
suds removing programme is on, the
wash time will increase.
Too much softener may cause an
overflow.
Too much softener may cause an
premature dispensing.
Check water supply tap.
Solution
• Make sure plug fits tightly in wall outlet.
• Reset circuit breaker or replace fuse.
Do not increase fuse capacity. If
problem is a circuit overload, have it
corrected by a qualified electrician.
• Turn on water supply tap.
• Close the door and press the Start/
Pause button. After pressing the
Start/Pause button, it may take a few
moments before the washing machine
begins to spin. The door must be locked
before spin can be achieved. Add 1
or 2 similar items to help balance the
load. Rearrange load to allow proper
spinning.
• Check if the 'Door Lock' icon is
illuminated. You can safely open the
door after the 'Door Lock' icon turns off.
• This is normal. The time remaining
shown in the display is only an
estimate. Actual time may vary.
• Follow softener guidelines to ensure
appropriate amount is used. Do not
exceed the maximum fill line.
• Follow the guidelines provided by the
detergent manufacturer.
• Close the dispenser drawer slowly. Do
not open the drawer during the wash
cycle.
• Do not overload. Check that the
washing machine is draining properly to
extract adequate water from the load.
Clothes load is too small to tumble
properly. Add a few towels.
• Turn off water supply tap.
EN
39