Using Anti-Slip Sheets (Optional); Wooden Floors (Suspended Floors) - LG fh695bdh6n Owner's Manual

Hide thumbs Also See for fh695bdh6n:
Table of Contents

Advertisement

Available languages

Available languages

Using Anti-Slip Sheets
(Optional)
If you install the appliance on a slippery surface, it
may move because of excessive vibration. Incorrect
leveling may cause malfunction through noise and
vibration. If this occurs, install the anti-slip sheets
under the leveling feet and adjust the level.
1
Clean the floor to attach the anti-slip sheets.
• Use a dry rag to remove and clean foreign
objects and moisture. If moisture remains, the
anti-slip sheets may slip.
2
Adjust the level after placing the appliance in the
installation area.
3
Place the adhesive side of the anti-slip sheets
on the floor.
• It is most effective to install the anti-slip sheets
under the front legs. If it is difficult to place the
pads under the front legs, place them under
the back legs.
4
Ensure the appliance is level.
• Push or rock the top edges of the appliance
gently to make sure that the appliance does
not rock. If the appliance rocks, level the
appliance again.
NOTE
• You can obtain anti-slip sheets from the LG Service
Centre.
12
This side up
Adhesive side
Wooden Floors (Suspended
Floors)
• Wooden floors are particularly susceptible to
vibration.
• To prevent vibration we recommend you place
rubber cups at least 15 mm thick of the each foot of
the appliance, secured to at least two floor beams
with screws.
Rubber Cup
• If possible install the appliance in one of the
corners of the room, where the floor is more stable.
• Fit the rubber cups to reduce vibration.
NOTE
• Proper placement and leveling of the washing
machine will ensure long, regular, and reliable
operation.
• The washing machine must be 100% horizontal
and stand firmly in position.
• It must not 'Seesaw' across corners under the load.
• The installation surface must be clean, free from
floor wax and other lubricant coatings.
• Do not let the feet of the washing machine get wet.
Failure to do so may cause vibration or noise.
• You can obtain rubber cups (p/no.4620ER4002B)
from the LG Service Centre.
EN

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents