Reset Base To Default; Check The Handset Firmware; Check The Base Firmware - VTech FS6608A User Manual

8.9.2

Reset Base to Default

1. Press Menu
use.
2. Press ▲/▼ to highlight
3. Press ▲/▼ to highlight Troubleshooting, then press OK
or OK.
4. Press ▲/▼ to highlight Reset Base, then press OK or
OK.
5. Enter the system PIN (default: 0000), then press OK. The
screen displays
6. Press Yes
confirmation tone.
8.9.3

Check the Handset Firmware

1. Press Menu
use.
2. Press ▲/▼ to highlight
3. Press ▲/▼ to highlight Troubleshooting, then press OK
or OK.
4. Press ▲/▼ to highlight HS Firmware, then press OK
or OK to review for the handset firmware version. Press
Back when done.
8.9.4

Check the Base Firmware

Menu
1. Press
use.
2. Press ▲/▼ to highlight
3. Press ▲/▼ to highlight Troubleshooting, then press OK
or OK.
4. Press ▲/▼ to highlight BS Firmware, then press OK or
OK to review for the base firmware version. Press
when done.
to enter the menu when the phone is not in
Reset Base to Default?.
to confirm.
to enter the menu when the phone is not in
to enter the menu when the phone is not in
Settings, then press OK.
Saved displays and you hear a
Settings, then press OK.
Settings, then press OK.
40
Back