Table of Contents
Advertisement
UTT Technologies
8.1.4 QoS
To set the speed limit for the wireless clients like computers, mobile phones that join the WLAN.
Bandwidth Limit: The available options are Each and Share; Each means each IP address
in this range is assigned with the configured bandwidth; Share means IP addresses in this
range shares the bandwidth.
Upload/Download: Specify the upload speed limit and download speed limit. 0 means no
limitation.
Back: Click to return to the Security interface.
OK: Click to finish configuration.
Cancel: Click to cancel the configuration.
8.2 RF
Set the RF (radio frequency) template for AP to distribute wireless RF parameters. Note: The radio
frequency templates can only be distributed to APs in batch.
The radio frequency template page shows the list of radio frequency templates, in which all the
parameters can be modified. The radio frequency templates can also be deleted or added.
http://www.uttglobal.com
Figure 8-8 Broadband Restrictions
Settings Tab
Page 52
Advertisement
Table of Contents
