Installation Guideline; Installation Requirements - UTT WX Series User Manual

UTT Technologies
Note: The reset operation will clear all the configuration that you have made.

1.2 Installation Guideline

When determining where to place the Device, please observe these guidelines:

Make sure that your workbench or standard rack is level and stable.

Do not place heavy objects on the Device.

Make sure that there is proper space for heat dissipation and adequate ventilation around the
Device.

Position the Device out of direct sunlight and away from sources of heat and ignition.

Please install the Device in a place far away from any High Power Radio or Radar Station.

Keep the Device far away from water!

Please use the supplied power cord.

1.3 Installation Requirements

The following items are required for installation:
1) Broadband Internet connection.
2) Tools and equipment:
(1) Broadband modem (optional).
(2) PC with an Ethernet card and TCP/IP installed.
(3) Network devices like a hub, a switch, a wireless access point.
(4) Network cables.
(5) Screwdriver.
(6) Power outlet.
http://www.uttglobal.com
Table 1-2 Interfaces and Buttons Description
Hardware Installation
Page 5