Table of Contents
Advertisement
UTT Technologies
Dynamic Multicast Optimization: Select to enable/disable optimal dynamic multicast
transmission.
DMO Channel Utilization Threshold: The higher the percentage, the higher the priority.
2.4GHz: Able to stably reach the Internet by setting the minimum and maximum transmission
rate of 2.4GHz.
5GHz: Able to stably reach the Internet by setting the minimum and maximum transmission
rate of 5GHz.
Airtime: The interface of wireless protocol.
Each Radio: Select it to enable this feature.
Background WMM Share: Specify the percentage of the background WMM share to ensure
the establishing of a stable connection with network resources and provide a high-quality
connection performance.
Best effort WMM Share: Specify the percentage of the most effective WMM sharing to
ensure establishing a stable connection with network resources and provide a high-quality
connection performance.
Video WMM Share: Specify the percentage of the video WMM sharing to ensure establishing
a stable connection with network resources and provide a high-quality video network
connection performance.
Voice WMM Share: Specify the percentage of the language WMM sharing to ensure
establishing a stable connection with network resources and provide high-quality voice
network connection performance.
Content Filtering: Select Enable to enable this feature.
Band: Select the frequency band that the WLAN supports. The available values are 2.4GHz,
5GHz and ALL.
Inactivity Timeout: The default value is 100 seconds.
Hide SSID: If enabled, connection to this SSID is possible only when the SSID name is
manually entered for searching, or before enabling this feature, you have already connected
to the SSID, so that it can be automatically connected.
Max Clients Threshold: Specify the maximum number of clients connected to the AP. It is
recommended not to exceed 20. 0 means no restriction.
Local Probe Request Threshold: Specify the threshold for local detection.
Auto update: Selected by default. It means the new WLAN will be automatically distributed to
all the online APs. When the number of automatically updated WLAN exceeds 4, the new
WLAN will not be automatically distributed.
Client Isolation: Prevent the mutual visit between the connected terminal devices.
http://www.uttglobal.com
Settings Tab
Page 45
Advertisement
Table of Contents
