EMC:
U.S. model
European model
Australian model
System Requirements
Refer to the appropriate section below for the minimum and
recommended computer system requirements necessary to use
this printer.
For Windows computers
To use your printer, you need Microsoft
Windows
NT 4.0 installed and the printer must be connected via a shielded,
twisted-pair parallel cable. If you want to connect your printer to
a USB port, you need a Windows 98 or Windows 2000 pre-
installed PC equipped with a USB port and the printer must be
connected via a standard, shielded USB cable.
Your computer should also meet the following system
requirements.
Minimum System Requirements
i486/66 MHz for Windows 98
i486/25 MHz for Windows 95 and
NT 4.0
i386/25 MHz for Windows 3.1
Pentium 133 MHz for Windows 2000
A-10
Printer Specifications
FCC part 15 subpart B class B
EN 55022 (CISPR Pub. 22) class B
EN 55024
EN 61000-3-2
EN 61000-3-3
AS/NZS 3548 class B
®
95, Windows
®
3.1, Windows
Recommended System
Pentium or higher processor
for Windows 98, 95, 3.1, and
NT 4.0
133 MHz or higher processor
for Windows 2000
®
®
Windows
98,
®
2000, or Windows
®