GE IC755CxS06RDx User Manual page 79

Pin 1
Mounting and Installation
For public disclosure
5.7.3.2 IC755CxW07CDx
Adhere to the following guidelines:
• A terminal block is supplied with the unit.
• The mating terminal block supports stranded 30 to 14 AWG (0.05 to 2.00 mm
wires.
• At a minimum, the cable must be rated for 75°C (167 °F) or more.
• Secure the serial cable to the mating connector while noting signal orientation and
tighten the screw clamps.
• The torque for the attaching screws is 0.3 Nm (2.66 in-lb).
Serial Port COM1 Details
Interface: x1 RS-232
Connectors: Euro Terminal (Tyco Electronics 284539-5)
Mating Connector: (Tyco Electronics 284510-5)
COM1 Pin Details
Pin #
1
2
3
4
5
Pin 5
IC755CxW07CDx Serial Port COM1 Pin-out
Signal Name
TXD
RXD
RTS
CTS
SGND
2
)
GFK-2847R 79