Firmware Upgrade For Specific Build Version - GE IC755CxS06RDx User Manual

32 GFK-2847R
For public disclosure

3.9.2 Firmware Upgrade for Specific Build Version

The following procedure is applicable to the following QuickPanel
• QuickPanel + IC755CxS06RDx (6" Display) with build 3 or below
• QuickPanel + IC755CxW07CDx (7" Display) with build 23 or below
+
• QuickPanel IC755CxS10CDx (10" Display), IC755CxS12CDx (12" Display), and
IC755CxS15CDx (15" Display) with build 14 or below
➢ ➢ To perform a firmware upgrade for a specific firmware build version
1. Put the files in the firmware package on the SD Card.
2. Double-click QPPlusUpdate.exe and run the program.
Perform the firmware upgrade.
3.
From the QuickPanel
Attention
QuickPanel + 7" inch Display Reboot and Run Program Message
+
Update Tool dialog box, click Upgrade.
For a QuickPanel + 7" inch Display unit, the
following message displays during the process of
firmware upgrade. You must re-run the
QPPlusUpdate.exe program after reboot, which
means you will run the QPPlusUpdate.exe program
a total of two times to complete the upgrade process.
QuickPanel⁺ Operator Interface User Manual
+
display units: