GE IC755CxS06RDx User Manual page 103

Appendix A Product Certifications and Installation Guidelines
For public disclosure
3. Adjust the position of the retaining clamp by pushing the lever of the retaining
clamp. Close the retaining clamp to fit the size of the cable.
Warning
Government Regulations
The FCC requires the following note to be published according to FCC guidelines:
Note This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Changes or modifications to this unit that are not expressly approved by GE Intelligent
Platforms could void the user's authority to operate the equipment.
Industry Canada requires the following note to be published:
Note This Class A digital apparatus complies with Canadian CAN ICES 3 (A)/NMB 3
(A).
EXPLOSION HAZARD — Do not connect or
disconnect equipment power, communication, audio,
or battery unless power has been removed or the
area is known to be non-hazardous.
EXPLOSION HAZARD — Substitution of
components may impair suitability.
EXPLOSION HAZARD — DO NOT VESA
MOUNT. Panel mount only with enclosures that
shall only be opened with the use of a tool in an area
where the risk of impact is low
DO NOT MAKE ANY CONNECTIONS TO THE
MINI-USB/MIC TERMINAL AS IT WILL
INVALIDATE THE ATEX APPROVAL.
GFK-2847R 103