Timer Recording; About Timer Recording; Timer Recording (G- Code ® System) - Philips DVDR3360H User Manual

Timer Recording

About timer recording

Use 'Timer Recording' to automatically
start and stop a recording at a later
date/ time. The recorder will tune to the
right program channel and begin
recording at the specifi ed time.
With this recorder, you can pre-program
up to 20 recordings.
To make a timer recording, your
recorder needs to know:
– The date you want to make the
recording.
– The recording input source.
– The start and stop time of the
recording.
– The mode of record quality, see
page 31.
SELECT
TIMER
TIPS: Set the appropriate mode of record quality for HDD recording, the same record quality will be transferred
from HDD to a recordable DVD.
38
Timer recording (G-
System)
This is a simple programming system for
recorders. To use it, enter the G-
programming number associated with
your television program. You can fi nd
this number in your TV listings magazine.
All the information needed by the
recorder for programming is contained in
the programming number.
A
Turn on the TV power. Select the
correct Video In channel at the TV.
If you are recording directly to a
DVD disc, insert the DVD recordable
disc before proceeding to step
B
Press TIMER on the remote control.
The timer schedule list appears.
Source Rec Mode Date
1
2
3
4
OK
5
6
C
Use
available empty slot and press OK.
The G-
appears.
Enter the G-
number for the show you wish to
record. Press CANCEL for manual
timer recording. To go back to timer
schedule press [RETURN].
CODE
Timer Schedule
Start End Rec To
keys to highlight the next
®
System setup menu
CODE
G- System
CODE
programming
CODE
CONFIRM CANCEL
OK OK
®
®
CODE
B
.