Recording; Before You Start Recording; Switching On; Manual Recording Of A Tv Channel - Philips DVDR1000 Instructions For Use Manual

Recording

Before you start recording

Recordings on a DVDR+RW at the disc pointer, the
point where the last recording stopped. Other
recordings may be overwritten without notice, unless
the disc is erase protected. In this respect, your DVD
Recorder behaves just like a Video Cassette Recorder.
In the Index Picture Screen you can select the point
where you want to start your recording. Use the w/v
(down or up cursor) and 5 REVERSE/6
FORWARD buttons to select a location on the disc
bar at the right of the Index Picture Screen.
Your DVD Recorder always checks the disc that you
have inserted:
When a DVD+RW disc is inserted on which
recordings have been made, the Index Picture
Screen is shown on your TV screen.
If the inserted disc is a completely empty
recordable disc, the message EMPTY DISC appears
on the display.
If the inserted disc is a DVD+RW disc with a
content that is not DVD video compatible (e.g. a
data disc), a dialog box is shown with the option to
erase or eject the disc. You can only record on this
disc after erasing it with the RECORD button.
stop Disc is not a DVD video disc.
Press OK to open tray or
11:15 am
press REC to erase disc.
EXT 1
A disc can hold up to 48 titles (including empty
titles). When this maximum is reached, the on-
screen message 'Too many titles' appears if you
want to make a new recording. You have to erase a
title first. See 'Managing Disc Content - Erasing a
Title.'
Note:
You can not access the system menu while recording.
38 RECORDING
All manuals and user guides at all-guides.com

Switching on

Switch on the TV and select the TV's Video In
channel or the channel you have chosen for video
playback (see operating manual for your TV).
This may be referred to as A/V IN, Video IN,
EXT IN or AUX IN.
Press B STANDBY/ON to turn on the Recorder.
The Recorder display lights. If you have not yet
installed your DVD Recorder, it will enter 'Initial
setup.' You will have to set your personal
preferences. (See 'Initial setup')
STANDBY/ON
Manual recording of a TV
channel
Recording
1 Insert a recordable DVD+RW disc.
2 Normally, the DVD Recorder displays the contents
of the disc on the screen.
3 Use the TUNER button to see the currently
selected TV channel.
4 Use CHANNEL 3 or CHANNEL 4 (on the
Recorder) or CH+, CH- or the digit buttons 0-9
(on the remote control) to select the channel
number you wish to record.