HP ProLiant DL170e G6 Software Configuration Manual page 25

Table 16
USB Configuration submenu fields
Field
USB BIOS Support
BIOS EHCI Hand-
Off
USB Ports
Remote Access Configuration submenu
Figure 21 Remote Access Configuration submenu (1)
Table 17
BIOS Serial Console
Field
BIOS Serial Console This value prevent you configure the serial port. It is the default value.
Description
This setting allows the use of the USB function. This is the default setting.
This setting makes the onboard USB function unavailable.
Set this value to support the EHCI-off. The setting default value is Enabled.
Set this value to not allow support the EHCI-off.
Set this value to enable USB ports. It is the default value.
Turn off external and internal USB ports. Once set , all the USB ports on
M/B invalid, you can use remote KVM or clear CMOS to enable it.
Remove remote KVM and remote Media options.
Turn off both physical and virtual ports. Once set, all the USB ports invalid,
you can clear CMOS to enable it.
Description
Set this value to allow configuring the serial port.
Options
Enabled
Disabled
Enabled
Disabled
Enabled
Disable
Phys Ports
Disable Vir
Ports
Disable All
Ports
Options
Disabled
Enabled
System BIOS configuration 25