Exterior-Rear View - Ricoh AFICIO AP306 Setup Manual

Getting Started

Exterior-Rear View

Simplex printer
1
1.
Paper Exit Cover
Open this cover when removing misfed
paper from the fusing unit.
2.
Ozone Filter
This filter reduces the amount of ozone
that is discharged into the air.
3.
Ventilator
Allows air to be discharged, preventing
components inside the printer from over-
heating.
Important
Do not leave the ventilator ob-
structed or blocked. Doing so cre-
ates the danger of malfunction due
to overheating.
4.
Controller Board Cover
Remove to install some options.
5.
Interface Board Cover
Remove to install optional interface
boards.
Important
Rating voltage of the network in-
terface port for the network: Max.
8
DC 5 V.
2
3
4 5
1
6 7 8
ZBGX070E
Rating voltage of the parallel inter-
face port for the computer: Max.
DC 5 V.
6.
Ventilator
Allows air to enter, preventing compo-
nents inside the printer from overheat-
ing.
Important
Do not leave the ventilator ob-
structed or blocked. Doing so cre-
ates the danger of malfunction due
to overheating.
7.
Parallel Interface Port
Plug the parallel cable that connects the
printer to the computer into this port.
Important
Rating voltage of the parallel inter-
face port for the computer: Max.
DC 5 V.
8.
Power Connector
Connect the power cord to this connec-
tor.
Draft 2000/06/22