Table of Contents
Advertisement
N
Assign print queues to the created printer as follows.
A Click [Assignments], and click [Add] in the [Assignments] group.
B In the [Available objects] box, click the queue created in step L, and click
[OK].
C Click [Configuration], and in the [Printer type] box, select [Parallel] using the
drop-down menu, and then click [Communication].
D Click [Manual load] in the [Communication type] group, and click [OK].
E After confirming the settings, click [OK].
O
Create a print server as follows.
A Select the context specified using the NIB Setup Tool (Step I-A), and on
the [Object] menu, click [Create].
B In the [Class of new object] box, click "Print Server", and click [OK]. When
you are using NetWare 5, click "Print Sever (Non NDPS)".
C In the [Print Server name] box, type the name of the print server.
Important
Use the same name as that specified using the NIB Setup Tool. (Step H).
D Click [Define additional properties] to check a box, and click [Create].
P
Assign the printer to the created print server as follows.
A Click [Assignments], and click [Add] in the [Assignments] group.
B In the [Available objects] box, click the queue created in the step M, and
click [OK].
C In the [Printers] group, click the printer assigned in step B , and click
[Printer Number].
D Type the printer number and click [OK].
Important
Use the same number as that specified as Remote Printer No. using the
NIB Setup Tool. (Step I-E).
E After confirming the settings, click [OK].
Q
Start the print server by typing the following from the console of the Net-
Ware Server.
If it is running, restart it after exiting it.
To exit
CAREE: unload pserver
To start
CAREE: load pserver print_server_name
NetWare 4.x, 5 - Advanced Settings
Draft 2000/06/22
4
65
Advertisement
Chapters
Table of Contents
