Table of Contents
Advertisement
14 | HBD7S(X) Camera Configuration Guide
If B/W is selected, do the following:
1.
Press the joystick to enter the DAY&NIGHT B/W menu (see
Figure 9
2.
Set BURST to ON or OFF (default), depending on whether you want to activate a
burst signal when switching from day mode to night mode.
Note
Some DVRs require a burst signal to detect a camera.
3.
Select RETURN to save your settings and return to the SETUP menu.
4.
Select RETURN to return to the SETUP menu.
3DNR (Digital Noise Reduction)
3D-DNR (3DNR) reduces noise in poorly lit scenes.
In the SETUP menu, navigate to 3DNR, and set it to ON (default) or OFF.
If ON is selected, do the following:
1.
Press the joystick to enter the 3DNR menu (see
Figure 10
2.
Set the digital noise reduction LEVEL to a value between 0 and 200. The default
setting is 200.
Note
High DNR levels may result in "ghosting."
3.
Select RETURN to save your settings and return to the SETUP menu.
www.honeywell.com/security
Day&Night B/W Menu
3DNR Menu
Figure
9).
Figure
10).
Advertisement
Table of Contents
